Bone tissue (osseous tissue) differs greatly from other tissues in the body. Bone is hard and many of its functions depend on that characteristic hardness.
Femur Revealing Cortical and Cancellous Bone
Image by TheVisualMD
Bone Structure
Build Better Bones
Image by TheVisualMD
Build Better Bones
Your muscles can't make a move without your skeleton's support. Weight-bearing exercise stimulates the cells that grow new bone tissue. Regular exercise helps prevent bone loss, which can lead to the brittle-bone disease osteoporosis. Tendons and ligaments, the collagen-rich connective tissues that connect your bones and attach muscles to bones, are vital to keeping your frame strong.
Image by TheVisualMD
Bone Structure
Bone tissue (osseous tissue) differs greatly from other tissues in the body. Bone is hard and many of its functions depend on that characteristic hardness. Later discussions will show that bone is also dynamic in that its shape adjusts to accommodate stresses. This section will examine the gross anatomy of bone first and then move on to its histology.
Overview
A hollow medullary cavity filled with yellow marrow runs the length of the diaphysis of a long bone. The walls of the diaphysis are compact bone. The epiphyses, which are wider sections at each end of a long bone, are filled with spongy bone and red marrow. The epiphyseal plate, a layer of hyaline cartilage, is replaced by osseous tissue as the organ grows in length. The medullary cavity has a delicate membranous lining called the endosteum. The outer surface of bone, except in regions covered with articular cartilage, is covered with a fibrous membrane called the periosteum. Flat bones consist of two layers of compact bone surrounding a layer of spongy bone. Bone markings depend on the function and location of bones. Articulations are places where two bones meet. Projections stick out from the surface of the bone and provide attachment points for tendons and ligaments. Holes are openings or depressions in the bones.
Bone matrix consists of collagen fibers and organic ground substance, primarily hydroxyapatite formed from calcium salts. Osteogenic cells develop into osteoblasts. Osteoblasts are cells that make new bone. They become osteocytes, the cells of mature bone, when they get trapped in the matrix. Osteoclasts engage in bone resorption. Compact bone is dense and composed of osteons, while spongy bone is less dense and made up of trabeculae. Blood vessels and nerves enter the bone through the nutrient foramina to nourish and innervate bones.
Source: CNX OpenStax
Additional Materials (3)
This browser does not support the video element.
Bone Marrow Showing Lacunae and Trabeculae
Camera descending into bone marrow dataset. Within the bone matrix that is shown one can see the spaces in the matrix which are called lacunae and the trabeculae which is a the mesh work of bone tissue
Video by TheVisualMD
This browser does not support the video element.
Femur Bone Marrow Revealing Lacunae and Trabeculae
Camera descending into bone marrow dataset. Within the bone matrix that is shown one can see the spaces in the matrix which are called lacunae and the trabeculae which is a the mesh work of bone tissue
Video by TheVisualMD
This browser does not support the video element.
Bone Marrow Blood Supply
Camera zooms out to show the blood supply to a section of bone marrow. Capillaries are shown carrying blood into the haversian canals of the bone tissue.
Video by TheVisualMD
0:06
Bone Marrow Showing Lacunae and Trabeculae
TheVisualMD
0:06
Femur Bone Marrow Revealing Lacunae and Trabeculae
TheVisualMD
0:13
Bone Marrow Blood Supply
TheVisualMD
Gross Anatomy
Femur of an Adult
Image by TheVisualMD
Femur of an Adult
Medical visualization reconstructed from scanned human. Cross-section of the head of a femur of an adult. The cross-section reveals the lattice work of the periosteum that occupies almost the entire space within the bone. Upon the cessation of growth, the epiphyseal plates are fused and are no longer active. 2 of 2.
Image by TheVisualMD
Gross Anatomy of Bone
The structure of a long bone allows for the best visualization of all of the parts of a bone (image). A long bone has two parts: the diaphysis and the epiphysis. The diaphysis is the tubular shaft that runs between the proximal and distal ends of the bone. The hollow region in the diaphysis is called the medullary cavity, which is filled with yellow marrow. The walls of the diaphysis are composed of dense and hard compact bone.
The wider section at each end of the bone is called the epiphysis (plural = epiphyses), which is filled with spongy bone. Red marrow fills the spaces in the spongy bone. Each epiphysis meets the diaphysis at the metaphysis, the narrow area that contains the epiphyseal plate (growth plate), a layer of hyaline (transparent) cartilage in a growing bone. When the bone stops growing in early adulthood (approximately 18–21 years), the cartilage is replaced by osseous tissue and the epiphyseal plate becomes an epiphyseal line.
The medullary cavity has a delicate membranous lining called the endosteum (end- = “inside”; oste- = “bone”), where bone growth, repair, and remodeling occur. The outer surface of the bone is covered with a fibrous membrane called the periosteum (peri- = “around” or “surrounding”). The periosteum contains blood vessels, nerves, and lymphatic vessels that nourish compact bone. Tendons and ligaments also attach to bones at the periosteum. The periosteum covers the entire outer surface except where the epiphyses meet other bones to form joints (image). In this region, the epiphyses are covered with articular cartilage, a thin layer of cartilage that reduces friction and acts as a shock absorber.
Periosteum and Endosteum
Figure 6.8 Periosteum and Endosteum The periosteum forms the outer surface of bone, and the endosteum lines the medullary cavity.
Flat bones, like those of the cranium, consist of a layer of diploë (spongy bone), lined on either side by a layer of compact bone (image). The two layers of compact bone and the interior spongy bone work together to protect the internal organs. If the outer layer of a cranial bone fractures, the brain is still protected by the intact inner layer.
Anatomy of a Flat Bone
Figure 6.9 Anatomy of a Flat Bone This cross-section of a flat bone shows the spongy bone (diploë) lined on either side by a layer of compact bone.
Source: CNX OpenStax
Additional Materials (2)
Long Bone Anatomy - Drawn & Defined
Video by Human Biology Explained/YouTube
Parts Of A Long Bone - Structure Of A Long Bone
Video by Whats Up Dude/YouTube
3:24
Long Bone Anatomy - Drawn & Defined
Human Biology Explained/YouTube
1:52
Parts Of A Long Bone - Structure Of A Long Bone
Whats Up Dude/YouTube
Bone Markings
Pelvis, Base of Spine, and Cauda Equina
Image by TheVisualMD
Pelvis, Base of Spine, and Cauda Equina
3D visualization based on scanned human data of the sacrum and pelvis. The triangular sacrum shapes the posterior wall of the pelvis. It is formed by five fused vertebrae and functions the stabilize the pelvis.
Image by TheVisualMD
Bone Markings
The surface features of bones vary considerably, depending on the function and location in the body. The table below describes the bone markings, which are illustrated in (image). There are three general classes of bone markings: (1) articulations, (2) projections, and (3) holes. As the name implies, an articulation is where two bone surfaces come together (articulus = “joint”). These surfaces tend to conform to one another, such as one being rounded and the other cupped, to facilitate the function of the articulation. A projection is an area of a bone that projects above the surface of the bone. These are the attachment points for tendons and ligaments. In general, their size and shape is an indication of the forces exerted through the attachment to the bone. A hole is an opening or groove in the bone that allows blood vessels and nerves to enter the bone. As with the other markings, their size and shape reflect the size of the vessels and nerves that penetrate the bone at these points.
Bone Markings
Marking
Description
Example
Articulations
Where two bones meet
Knee joint
Head
Prominent rounded surface
Head of femur
Facet
Flat surface
Vertebrae
Condyle
Rounded surface
Occipital condyles
Projections
Raised markings
Spinous process of the vertebrae
Protuberance
Protruding
Chin
Process
Prominence feature
Transverse process of vertebra
Spine
Sharp process
Ischial spine
Tubercle
Small, rounded process
Tubercle of humerus
Tuberosity
Rough surface
Deltoid tuberosity
Line
Slight, elongated ridge
Temporal lines of the parietal bones
Crest
Ridge
Iliac crest
Holes
Holes and depressions
Foramen (holes through which blood vessels can pass through)
Fossa
Elongated basin
Mandibular fossa
Fovea
Small pit
Fovea capitis on the head of the femur
Sulcus
Groove
Sigmoid sulcus of the temporal bones
Canal
Passage in bone
Auditory canal
Fissure
Slit through bone
Auricular fissure
Foramen
Hole through bone
Foramen magnum in the occipital bone
Meatus
Opening into canal
External auditory meatus
Sinus
Air-filled space in bone
Nasal sinus
Bone Features
The surface features of bones depend on their function, location, attachment of ligaments and tendons, or the penetration of blood vessels and nerves.
Source: CNX OpenStax
Bone Tissue
Femur Cross Section Revealing Compact and Spongy Bone
Image by TheVisualMD
Femur Cross Section Revealing Compact and Spongy Bone
Visualization of a cross-section of the femur bone. The underlying structures of bone consists of living cells and protein fibers wrapped around layers of hard mineral salts. Long bones like the femur consist of concentric rings of these mixtures, ranging in texture from coral-like to compact or wood-like, to rock-hard - a pattern of cylinders packed within cylinders laced with wormholes. Surrounding the fat storehouses of the inner marrow, the spongy, innermost cylinder is a matrix of rigid struts, which take some of the load that the bone has to bear while leaving space for production of red blood cells. The middle, compact layer is made up of concentric bony tubes bundled like logs on a truck, each one laced with a system of canals containing blood vessels. Special holes, or pits, allow enough space for individual bone cells to reside within. The cylinder's outer layer called the cement line, attaches to the enamel-hard exterior shell, which is irrigated by blood vessels and innervated by neurons that can signal pain.
Image by TheVisualMD
Compact and Spongy Bone
Compact and Spongy Bone
The differences between compact and spongy bone are best explored via their histology. Most bones contain compact and spongy osseous tissue, but their distribution and concentration vary based on the bone’s overall function. Compact bone is dense so that it can withstand compressive forces, while spongy (cancellous) bone has open spaces and supports shifts in weight distribution.
Compact Bone
Compact bone is the denser, stronger of the two types of bone tissue (image). It can be found under the periosteum and in the diaphyses of long bones, where it provides support and protection.
The microscopic structural unit of compact bone is called an osteon, or Haversian system. Each osteon is composed of concentric rings of calcified matrix called lamellae (singular = lamella). Running down the center of each osteon is the central canal, or Haversian canal, which contains blood vessels, nerves, and lymphatic vessels. These vessels and nerves branch off at right angles through a perforating canal, also known as Volkmann’s canals, to extend to the periosteum and endosteum.
The osteocytes are located inside spaces called lacunae (singular = lacuna), found at the borders of adjacent lamellae. As described earlier, canaliculi connect with the canaliculi of other lacunae and eventually with the central canal. This system allows nutrients to be transported to the osteocytes and wastes to be removed from them.
Spongy (Cancellous) Bone
Like compact bone, spongy bone, also known as cancellous bone, contains osteocytes housed in lacunae, but they are not arranged in concentric circles. Instead, the lacunae and osteocytes are found in a lattice-like network of matrix spikes called trabeculae (singular = trabecula) (image). The trabeculae may appear to be a random network, but each trabecula forms along lines of stress to provide strength to the bone. The spaces of the trabeculated network provide balance to the dense and heavy compact bone by making bones lighter so that muscles can move them more easily. In addition, the spaces in some spongy bones contain red marrow, protected by the trabeculae, where hematopoiesis occurs.
Diagram of Spongy Bone
Spongy bone is composed of trabeculae that contain the osteocytes. Red marrow fills the spaces in some bones.
Aging and the…
Skeletal System: Paget’s Disease Paget’s disease usually occurs in adults over age 40. It is a disorder of the bone remodeling process that begins with overactive osteoclasts. This means more bone is resorbed than is laid down. The osteoblasts try to compensate but the new bone they lay down is weak and brittle and therefore prone to fracture.
While some people with Paget’s disease have no symptoms, others experience pain, bone fractures, and bone deformities (image). Bones of the pelvis, skull, spine, and legs are the most commonly affected. When occurring in the skull, Paget’s disease can cause headaches and hearing loss.
Paget's Disease
Normal leg bones are relatively straight, but those affected by Paget’s disease are porous and curved.
What causes the osteoclasts to become overactive? The answer is still unknown, but hereditary factors seem to play a role. Some scientists believe Paget’s disease is due to an as-yet-unidentified virus.
Paget’s disease is diagnosed via imaging studies and lab tests. X-rays may show bone deformities or areas of bone resorption. Bone scans are also useful. In these studies, a dye containing a radioactive ion is injected into the body. Areas of bone resorption have an affinity for the ion, so they will light up on the scan if the ions are absorbed. In addition, blood levels of an enzyme called alkaline phosphatase are typically elevated in people with Paget’s disease.
Bisphosphonates, drugs that decrease the activity of osteoclasts, are often used in the treatment of Paget’s disease. However, in a small percentage of cases, bisphosphonates themselves have been linked to an increased risk of fractures because the old bone that is left after bisphosphonates are administered becomes worn out and brittle. Still, most doctors feel that the benefits of bisphosphonates more than outweigh the risk; the medical professional has to weigh the benefits and risks on a case-by-case basis. Bisphosphonate treatment can reduce the overall risk of deformities or fractures, which in turn reduces the risk of surgical repair and its associated risks and complications.
Source: CNX OpenStax
Additional Materials (3)
Structure Of Bone Tissue - Bone Structure Anatomy - Components Of Bones
Video by Whats Up Dude/YouTube
Introduction to Bone Biology
Video by Amgen/YouTube
Microscopic structure of bone - the Haversian system | NCLEX-RN | Khan Academy
Video by khanacademymedicine/YouTube
3:02
Structure Of Bone Tissue - Bone Structure Anatomy - Components Of Bones
Whats Up Dude/YouTube
2:44
Introduction to Bone Biology
Amgen/YouTube
4:09
Microscopic structure of bone - the Haversian system | NCLEX-RN | Khan Academy
khanacademymedicine/YouTube
Bone Cells
Osteoblast
Image by TheVisualMD
Osteoblast
Bone is living tissue that is constantly being replenished throughout an individual's lifetime, at a rate of about 10% a year. Osteoclasts are cells that break down old bone, a process known as bone resorption; osteoblasts are cells that form new bone. Balance between the two processes is essential for bone health. Osteocalcin is a bone protein that is released into the blood during bone turnover.
Image by TheVisualMD
Bone Cells and Tissue
Bone contains a relatively small number of cells entrenched in a matrix of collagen fibers that provide a surface for inorganic salt crystals to adhere. These salt crystals form when calcium phosphate and calcium carbonate combine to create hydroxyapatite, which incorporates other inorganic salts like magnesium hydroxide, fluoride, and sulfate as it crystallizes, or calcifies, on the collagen fibers. The hydroxyapatite crystals give bones their hardness and strength, while the collagen fibers give them flexibility so that they are not brittle.
Although bone cells compose a small amount of the bone volume, they are crucial to the function of bones. Four types of cells are found within bone tissue: osteoblasts, osteocytes, osteogenic cells, and osteoclasts (image).
Bone Cells
Four types of cells are found within bone tissue. Osteogenic cells are undifferentiated and develop into osteoblasts. When osteoblasts get trapped within the calcified matrix, their structure and function changes, and they become osteocytes. Osteoclasts develop from monocytes and macrophages and differ in appearance from other bone cells.
The osteoblast is the bone cell responsible for forming new bone and is found in the growing portions of bone, including the periosteum and endosteum. Osteoblasts, which do not divide, synthesize and secrete the collagen matrix and calcium salts. As the secreted matrix surrounding the osteoblast calcifies, the osteoblast become trapped within it; as a result, it changes in structure and becomes an osteocyte, the primary cell of mature bone and the most common type of bone cell. Each osteocyte is located in a space called a lacuna and is surrounded by bone tissue. Osteocytes maintain the mineral concentration of the matrix via the secretion of enzymes. Like osteoblasts, osteocytes lack mitotic activity. They can communicate with each other and receive nutrients via long cytoplasmic processes that extend through canaliculi (singular = canaliculus), channels within the bone matrix.
If osteoblasts and osteocytes are incapable of mitosis, then how are they replenished when old ones die? The answer lies in the properties of a third category of bone cells—the osteogenic cell. These osteogenic cells are undifferentiated with high mitotic activity and they are the only bone cells that divide. Immature osteogenic cells are found in the deep layers of the periosteum and the marrow. They differentiate and develop into osteoblasts.
The dynamic nature of bone means that new tissue is constantly formed, and old, injured, or unnecessary bone is dissolved for repair or for calcium release. The cell responsible for bone resorption, or breakdown, is the osteoclast. They are found on bone surfaces, are multinucleated, and originate from monocytes and macrophages, two types of white blood cells, not from osteogenic cells. Osteoclasts are continually breaking down old bone while osteoblasts are continually forming new bone. The ongoing balance between osteoblasts and osteoclasts is responsible for the constant but subtle reshaping of bone. image reviews the bone cells, their functions, and locations.
Bone Cells
Cell type
Function
Location
Osteogenic cells
Develop into osteoblasts
Deep layers of the periosteum and the marrow
Osteoblasts
Bone formation
Growing portions of bone, including periosteum and endosteum
Osteocytes
Maintain mineral concentration of matrix
Entrapped in matrix
Osteoclasts
Bone resorption
Bone surfaces and at sites of old, injured, or unneeded bone
Source: CNX OpenStax
Additional Materials (1)
Cells of Bone Formation
Video by Medic Tutorials - Medicine and Language/YouTube
7:53
Cells of Bone Formation
Medic Tutorials - Medicine and Language/YouTube
Blood and Nerve Supply
Cement Line of Long Bone
Image by TheVisualMD
Cement Line of Long Bone
Visualization of a cross-section of the femur bone. The underlying structures of bone consists of living cells and protein fibers wrapped around layers of hard mineral salts. Long bones like the femur consist of concentric rings of these mixtures, ranging in texture from coral-like to compact or wood-like, to rock-hard - a pattern of cylinders packed within cylinders laced with wormholes. Surrounding the fat storehouses of the inner marrow, the spongy, innermost cylinder is a matrix of rigid struts, which take some of the load that the bone has to bear while leaving space for production of red blood cells. The middle, compact layer is made up of concentric bony tubes bundled like logs on a truck, each one laced with a system of canals containing blood vessels. Special holes, or pits, allow enough space for individual bone cells to reside within. The cylinder's outer layer called the cement line, attaches to the enamel-hard exterior shell, which is irrigated by blood vessels and innervated by neurons that can signal pain.
Image by TheVisualMD
Blood and Nerve Supply
The spongy bone and medullary cavity receive nourishment from arteries that pass through the compact bone. The arteries enter through the nutrient foramen (plural = foramina), small openings in the diaphysis (image). The osteocytes in spongy bone are nourished by blood vessels of the periosteum that penetrate spongy bone and blood that circulates in the marrow cavities. As the blood passes through the marrow cavities, it is collected by veins, which then pass out of the bone through the foramina.
In addition to the blood vessels, nerves follow the same paths into the bone where they tend to concentrate in the more metabolically active regions of the bone. The nerves sense pain, and it appears the nerves also play roles in regulating blood supplies and in bone growth, hence their concentrations in metabolically active sites of the bone.
Diagram of Blood and Nerve Supply to Bone
Blood vessels and nerves enter the bone through the nutrient foramen.
Send this HealthJournal to your friends or across your social medias.
Bone Structure
Bone tissue (osseous tissue) differs greatly from other tissues in the body. Bone is hard and many of its functions depend on that characteristic hardness.